LogoLogo
  • Products
  • Applications
  • Quality & Reliability
  • Technical supports
  • About us
Login
/Register
logo
Search
Sample Request
Shanghai Southchip Semiconductor Technology Co., Ltd.
Southchip, Born for efficiency!

Contact Us
4006803188 (Business Inquiry Hotline)
021-38067888 (General Service Hotline)
sc-sales-service@southchip.com
16th Floor, Building D, No. 54, Lane 565, Shengxia Road, Pudong New Area, Shanghai
Southchip Products
Automotive ProductsDC-DC ConvertersAC-DC ConvertersUSB Type-C & Power DeliveryPMICCharging ManagementBattery Management Solution
Solutions
AutomotiveIndustrial ControlConsumer Electronics
About Southchip
IntroductionCompany NewsInvestor RelationsRecruitmentContact Us
©Copyright 2023 Shanghai Southchip Semiconductor Technology Co., Ltd. Shanghai ICP No. 16011443-1

SC8510

Dual Cell High Efficiency 10-A Forward 2:1 Converter and Reverse 1:2 Charger with Load-Switch Function

SC8510SC8510

SC8510

SC8510 is a 99.5% efficiency, 10-A battery discharging (forward 2:1 conversion) and 4-A charging (reverse 1:2 conversion) solution using a switched capacitor architecture. The switched cap architecture and the integrated FETs are optimized to enable a 50% cycle. SC8510 supports designers to migrate current 1S system to 2S battery configuration in following two ways. As a converter, SC8510 works as a voltage divider and can be inserted between main buck-boost charger VSYS output and other loads working under 1S-equivalent voltage. As an integration of converter and charger, SC8510 can be inserted between 2S Li+ battery pack and main buck charger VBAT output, which helps designers to preserve the downstream power architecture of 1S battery system. SC8510 is also integrated with load-switch function used to cut off system power. It can be configured to implement reset and shipping mode function. SC8510 adopts 42-pin CSP 2.5mm X 2.9mm package.
SC8510
SC8510 is a 99.5% efficiency, 10-A battery discharging (forward 2:1 conversion) and 4-A charging (reverse 1:2 conversion) solution using a switched capacitor architecture. The switched cap architecture and the integrated FETs are optimized to enable a 50% cycle. SC8510 supports designers to migrate current 1S system to 2S battery configuration in following two ways. As a converter, SC8510 works as a voltage divider and can be inserted between main buck-boost charger VSYS output and other loads working under 1S-equivalent voltage. As an integration of converter and charger, SC8510 can be inserted between 2S Li+ battery pack and main buck charger VBAT output, which helps designers to preserve the downstream power architecture of 1S battery system. SC8510 is also integrated with load-switch function used to cut off system power. It can be configured to implement reset and shipping mode function. SC8510 adopts 42-pin CSP 2.5mm X 2.9mm package.
Product Details
Design / Development
Technical Documentation
Applications

Product Details

Technical Documentation

Parameter NameParameter Value
Pout_Typ.50W
VBUS range3.2~11V
Abs. Vbus (max)16V
Vout range1.6~5.5V
Abs. Vout (max)6V
Parameter NameParameter Value
Max Charge Current10A
Typ. Quiescent Current80uA
ADC resolutionNA
IBUS accuracyNA
PackageWLCSP42-2.5mm x 2.9mm
Parameter NameParameter Value
Pout_Typ.50W
VBUS range3.2~11V
Abs. Vbus (max)16V
Vout range1.6~5.5V
Abs. Vout (max)6V
Max Charge Current10A
Typ. Quiescent Current80uA
ADC resolutionNA
IBUS accuracyNA
PackageWLCSP42-2.5mm x 2.9mm